Skip to main content
THOMSON SB FO E P CI WRU
CE UNI EN ISO 20345:2012 SRC
3C060D
Ankle safety shoe
Description
THOMSON SB FO E P CI WRU
38-47
Description and further information
High safety shoe, WRU back leather and heel with anti-scratch back leather thickness 1,8-2,0 mm., with refracting fabric insert.
Perspiring and abrasion resistant fabric lining.
Soft, lined and padded tongue.
COMPLETELY METAL FREE SHOE
TOECAP 200J polymeric composite non-thermic according to EN 12568
MIDSOLE flexible antiperforation composite INSULATING fabric according to EN 12568
SOLE 3CROSS three-densities polyurethane dielectric, resistant to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC
- The bottom of the shoe, within some limits (no humidity, it doesnÂ’t concern the upper), offers electrical resistance against tension up to 1.000V - M 0hm > 1.000
- Electrical resistance: CSA Z195-14 Canadian standard increase 1 kV/sec - voltage 20.000V /60 hz - duration 1 minute
- Electrical resistance: ASTM F2413-11 standard increase 1 kV/sec voltage 20.000V/60 Hz duration 1 minute
Electric flow requirement less than 1,0 mA
ANTITORSION insert in the sole to assure stability on uneven ground
INSOLE DIELECTRIC, removable, anatomic, absorbing, insulating and perspiring
FO sole resistance to hydrocarbons
E energy absorption on seat region
P antiperforation midsole
CI cold insulation of sole complex -17°C
Size 38-47 Shoe weight Sz 42 gr. 600
Size guide
Size guide
Comparison table of measurements
EUROPAUKUSMILLIMETERSINCHES
35
2,5

3,5

225

8,9

36
3

4

232,5

9,2

37
4

5

240

9,5

38
5

6

247,5

9,7

39
6

7

255

10

40
6,5

7,5

262,5

10,3

41
7

8

270

10,6

42
8

9

277,5

10,9

43
9

10

285

11,2

44
10

11

292,5

11,5

45
10,5

11,5

300

11,8

46
11

12

307,5

12,1

47
12

13

315

12,4

48
13

14

322,5

12,7

49
14

15

330

13

See anti-slip results
ANTI-SLIP RESULTS
Anti-slip performance testing
Ceramic tile floor with NaLS

Forward Heel
(heel slip 7°)

≥ 0.31
≥ 0.38

Backward heel 
(heel slip 7°)

≥ 0.36
≥ 0.49
Ceramic tile floor with glycerin

Forward Heel
(heel slip 7°)

≥ 0.19
≥ 0.22

Backward heel 
(heel slip 7°)

≥ 0.22
≥ 0.23
Recommended areas of use
Cold Environments
Electrician

Certifications applied
Heel Energy Absorption
Heel Energy Absorption
Certifications
Heel Energy Absorption
Footwear with energy absorption in the heel to reduce impact while walking. Enhances comfort and protects joints in demanding work environments.
Insulation up to 20,000V
Insulation up to 20,000V
Certifications
Insulation up to 20,000V
Dielectric soles insulated up to 20,000 V, designed to shield the operator from high-voltage electric discharges in electrical or industrial work environments.
Puncture-Resistant Plate
Puncture-Resistant Plate
Certifications
Puncture-Resistant Plate
A puncture-resistant layer embedded in the sole protects the foot from sharp objects and perforations, ensuring safety in hazardous work environments.
Hydrocarbon Resistance
Hydrocarbon Resistance
Certifications
Hydrocarbon Resistance
Footwear resistant to hydrocarbons, designed to maintain the properties of the sole when in contact with oils and fuels. Ideal for industrial environments and workshops.
Slip Resistant Sole
Slip Resistant Sole
Certifications
Slip Resistant Sole
Slip-resistant sole with special compound and tread pattern designed to ensure maximum grip on wet or slippery surfaces. Improves safety during work.
Water-Repellent Upper
Water-Repellent Upper
Certifications
Water-Repellent Upper
Footwear with water-repellent upper that prevents the penetration of liquids, keeping the foot dry. Perfect for wet environments or outdoor work.
Technical materials
High Visibility
High Visibility
Technical materials
High Visibility
High-visibility footwear with reflective inserts for greater safety in low-light conditions. Ideal for night work or high-risk environments.
Extreme Lightness
Extreme Lightness
Technical materials
Extreme Lightness
This footwear uses a combination of innovative materials that minimize the weight of the work shoe, thus maximizing comfort and conserving energy at the end of the day.
Cold Insulating Outsole
Cold Insulating Outsole
Technical materials
Cold Insulating Outsole
Cold-insulating outsole designed to keep feet warm, effectively protecting from low temperatures in cold or outdoor work environments.
Mondo Point 11
Mondo Point 11
Technical materials
Mondo Point 11
Mondo Point is an international standard indicating the type of fit of a particular shoe. In terms of fit, Mondo Point 11 indicates a wide, roomy, and comfortable shoe for the foot.
Metal-Free
Metal-Free
Technical materials
Metal-Free
Metal-free work shoes, free of metal components, lightweight and comfortable, ideal for environments with high security checks. Offers protection and flexibility without interfering with metal detectors.
No metal
No metal
Technical materials
No metal

High-resistance TEXTILE anti-perforation midsole. Protects the foot from penetration by dangerous and sharp objects. At the same time, it ensures maximum flexibility and lightness for the foot.
COMPOSITE toe cap resistant to impacts up to 200 Joules, lightweight and metal-free, ideal for safely protecting the toes without adding weight to the footwear.
Unlike other materials, composite offers several advantages: thermal insulation (does not transmit heat), non-magnetic (not detected by metal detectors), and memory (in case of compression, it returns to its original shape, leaving toes free).

Anti-Torsion Sole
Anti-Torsion Sole
Technical materials
Anti-Torsion Sole

The Anti Torsion system uses a thermoplastic shank designed to increase stability on irregular and wet surfaces. Unlike standard shanks, it flexes with the foot’s natural motion, reducing the risk of twists and falls. Ideal for outdoor work, especially in construction, where surface control is critical.

Three to be - Triple Density Injection
Three to be - Triple Density Injection
Technical materials
Three to be - Triple Density Injection

Three to Be® - Tripla Densità Iniettata technology represents one of the most advanced results of our R&D efforts. Patented by Giasco, it integrates three entirely polyurethane-injected sole layers to optimize safety shoe performance in terms of comfort, stability, and slip resistance.

Downloadable documents
Other products in the same line
Request further information
Request further information
Request further information

Are you a company interested in our products or want to become a Giasco distributor?

Fill out the form and you will be contacted by our technical-sales team or discover all the advantages of becoming a Giasco distributor.

Always stay one step ahead in the world of safety
Subscribe to our newsletter and get early access to:
  • The latest innovations in safety footwear
  • Case studies and secrets for workplace protection
  • Insights into industry regulations
  • Events, trade fairs and exclusive meetings with experts