Skip to main content
ELECTRO SB FO E PL SR
CE EN ISO 20345:2022 SB FO E PL SR
3R435N
Low safety shoe
36-47
Description
  • Toecap: 200J polymeric composite non-thermic
  • Upper: Microfiber Micro-tech Suede 1,8-2,0 mm
  • Midsole: PL certified antiperforation dielectric composite fabric
  • Insole: Dielectric insulating foam open-cell polyurethane extra comfort
  • Sole: PU Dielectric/Outsole, PU Dielectric/Midsole, PU Dielectric/Upper sole
  • Other: 20.000V Sole Insulation (ASTM 2413-11, C.S.A. Z195-14, INSULATING SOLE FROM 1.000 MΩ), Extra Perspiration, Anti-torsion sole shank
Technical documents
Contact us
ELECTRO SB FO E PL SR
36-47
Contact us
Description and further information

Low safety shoe, technical fabric MICRO-tech thickness 1,8-2,0 mm., and perspiring and abrasion resistant net.
Highly perspiring and abrasion resistant net.
Soft, lined and padded tongue.
COMPLETELY METAL FREE SHOE
TOECAP 200J polymeric composite non-thermic according to EN 22568
PL MIDSOLE flexible antiperforation composite INSULATING fabric according to EN 22568
3 RUN SOLE in dielectric triple-density polyurethane, resistant to hydrocarbons and abrasion, anti-shock and anti-slip.
Article 3R435N has been tested using a method analogous to ASTM F2413-18 (EH) and CSA Z195-14: determination of resistance to an electric shock, increase 1 kV/sec, voltage 20,000 V/60 Hz  holding the voltage for 1 minute. Electrical current requirement below 1.0 mA.
The outsole of the footwear, within specific limits (in the absence of moisture, not referring to the upper), was tested using a method analogous to EN ISO 20345:2022 to provide electrical insulation against voltages up to 1000 V  M ohm >1000.
(Test report No. 4212933/E)
ANTITORSION insert in the sole to ensure stability on uneven ground
DIELECTRIC INSOLE, extracomfort bimaterial with activated carbons, perspiring, removable, anatomic, absorbing, insulating and antibacterial.
Eco-Friendly
FO sole resistance to hydrocarbons
E energy absorption on seat region
PL sole resistance to perforation
SR sole resistance against slipping

THIS PRODUCT COMPLIES WITH THE REQUIREMENTS OF THE STANDARD ASTM F2413-24:
- Impact resistant footwear (I)
- Compression resistant footwear (C)
- Puncture Resistant Footwear (PR)
- Electric Hazard Resistant Footwear (EH)
- Slip Resistance (SRO)
Size 36-47 Shoe weight size 42 gr. 510

Size guide
Size guide
Comparison table of measurements
EUROPAUKUSMILLIMETERSINCHES
35
2,5

3,5

225

8,9

36
3

4

232,5

9,2

37
4

5

240

9,5

38
5

6

247,5

9,7

39
6

7

255

10

40
6,5

7,5

262,5

10,3

41
7

8

270

10,6

42
8

9

277,5

10,9

43
9

10

285

11,2

44
10

11

292,5

11,5

45
10,5

11,5

300

11,8

46
11

12

307,5

12,1

47
12

13

315

12,4

48
13

14

322,5

12,7

49
14

15

330

13
Recommended areas of use
Electrician
Certifications applied
Heel Energy Absorption
Heel Energy Absorption
Certifications
Heel Energy Absorption

Footwear with energy absorption in the heel to reduce impact while walking. Enhances comfort and protects joints in demanding work environments.

ASTM F2413-24
ASTM F2413-24
Certifications
ASTM F2413-24
ASTM F2413-+E18:E6924 specifies the safety, performance, and protective requirements that safety footwear must meet according to U.S. standards.
DGUV 112-191
DGUV 112-191
Certifications
DGUV 112-191
DGUV 112-191 is a German regulation defining requirements for using orthopedic insoles in safety footwear, ensuring that modifications do not compromise protection or performance.
Insulation up to 20,000V
Insulation up to 20,000V
Certifications
Insulation up to 20,000V
Dielectric soles insulated up to 20,000 V, designed to shield the operator from high-voltage electric discharges in electrical or industrial work environments.
PL Puncture Resistance with Non-Metallic Insert (nail Ø 4.5mm)
PL Puncture Resistance with Non-Metallic Insert (nail Ø 4.5mm)
Certifications
PL Puncture Resistance with Non-Metallic Insert (nail Ø 4.5mm)
Anti-perforation plate inserted in the sole to protect the foot from sharp objects and punctures, ensuring safety in hazardous work environments. PL puncture resistance with non-metallic insert (nail Ø 4.5mm)
Hydrocarbon Resistance
Hydrocarbon Resistance
Certifications
Hydrocarbon Resistance
Footwear resistant to hydrocarbons, designed to maintain the properties of the sole when in contact with oils and fuels. Ideal for industrial environments and workshops.
Slip Resistance (mandatory ceramic-Nals test)
Slip Resistance (mandatory ceramic-Nals test)
Certifications
Slip Resistance (mandatory ceramic-Nals test)
According to EN ISO 20345:2022, slip resistance is a mandatory requirement and is tested on a ceramic surface contaminated with sodium lauryl sulfate (NaLS) solution. This test, stricter than previous versions, simulates real slipping conditions and ensures that all certified safety footwear provides a minimum level of grip. The SRA, SRB, and SRC classifications have been removed in the new regulation, making the NaLS ceramic test the standard.
Technical materials
High Breathability
High Breathability
Technical materials
High Breathability
Highly breathable footwear that promotes air circulation, keeping the foot cool and dry even during long hours of use.
Extreme Lightness
Extreme Lightness
Technical materials
Extreme Lightness
This footwear uses a combination of innovative materials that minimize the weight of the work shoe, thus maximizing comfort and conserving energy at the end of the day.
Mondo Point 11
Mondo Point 11
Technical materials
Mondo Point 11
Mondo Point is an international standard indicating the type of fit of a particular shoe. In terms of fit, Mondo Point 11 indicates a wide, roomy, and comfortable shoe for the foot.
Metal-Free
Metal-Free
Technical materials
Metal-Free
Metal-free work shoes, free of metal components, lightweight and comfortable, ideal for environments with high security checks. Offers protection and flexibility without interfering with metal detectors.
No metal
No metal
Technical materials
No metal

High-resistance TEXTILE anti-perforation midsole. Protects the foot from penetration by dangerous and sharp objects. At the same time, it ensures maximum flexibility and lightness for the foot.
COMPOSITE toe cap resistant to impacts up to 200 Joules, lightweight and metal-free, ideal for safely protecting the toes without adding weight to the footwear.
Unlike other materials, composite offers several advantages: thermal insulation (does not transmit heat), non-magnetic (not detected by metal detectors), and memory (in case of compression, it returns to its original shape, leaving toes free).

Slip Resistance (optional glycerin test)
Slip Resistance (optional glycerin test)
Technical materials
Slip Resistance (optional glycerin test)
The slip-resistant sole features a special compound and tread pattern designed to maximize grip on wet or slippery surfaces, improving safety on the job.
Microtech
Microtech
Technical materials
Microtech

Microtech is a water-repellent, breathable, and durable suede-effect microfiber that adds structure and lightness to the footwear. It ensures lasting durability, a soft touch, and high resistance to abrasion and tearing.

Anti-Torsion Sole
Anti-Torsion Sole
Technical materials
Anti-Torsion Sole

The Anti Torsion system uses a thermoplastic shank designed to increase stability on irregular and wet surfaces. Unlike standard shanks, it flexes with the foot’s natural motion, reducing the risk of twists and falls. Ideal for outdoor work, especially in construction, where surface control is critical.

Three to be™ - Triple Density Injection
Three to be™ - Triple Density Injection
Technical materials
Three to be™ - Triple Density Injection

Three to Be® - Tripla Densità Iniettata technology represents one of the most advanced results of our R&D efforts. Patented by Giasco, it integrates three entirely polyurethane-injected sole layers to optimize safety shoe performance in terms of comfort, stability, and slip resistance.

Request further information
Request further information
Request further information

Are you a company interested in our products or want to become a Giasco distributor?

Fill out the form and you will be contacted by our technical-sales team or discover all the advantages of becoming a Giasco distributor.

Find out more
Always stay one step ahead in the world of safety
Subscribe to our newsletter and get early access to:
  • The latest innovations in safety footwear
  • Case studies and secrets for workplace protection
  • Insights into industry regulations
  • Events, trade fairs and exclusive meetings with experts
Sign up now
Always stay one step ahead in the world of security
Subscribe to our newsletter. You can unsubscribe from the newsletter at any time with just one click.