Skip to main content
TESLA SB FO E PS CI HI WPA WR HRO SR
CE EN ISO 20345:2022
HRD057E
Ankle safety shoe
39-47
Description
  • Toecap: 200J polymeric composite non-thermic
  • Upper: Suede leather 1,8-2,0 mm and PU coated anti-scratch leather Hydro Internal lining Windtex® waterproof membrane
  • Midsole: PS certified antiperforation dielectric composite fabric
  • Insole: Dielectric insulating foam open-cell polyurethane extra comfort
  • Sole: Rubber/Outsole, PU/Midsole
  • Other: 20.000V Sole Insulation (ASTM 2413-11, C.S.A. Z195-14, INSULATING SOLE FROM 1.000 M), Water Resistant, HRO +300°C
Technical documents
Contact us
TESLA SB FO E PS CI HI WPA WR HRO SR
39-47
Contact us
Description and further information
High safety shoe, WPA anti-scratch back leather thickness 1,8-2,0 mm.
Perspiring and abrasion resistant fabric lining.
Soft, Windtex® water resistant membrane lining, with very good perspiration and abrasion resistance.
Shoe with refracting fabric insert. Soft, lined and padded tongue.
COMPLETELY METAL FREE SHOE
TOECAP 200J polymeric composite non-thermic according to EN 22568
PS MIDSOLE fabric INSULATION composite flexible anti-perforation according to EN 22568
SOLE HARD ROCK INSULATING bidensity polyurethane and INSULATING RUBBER resistant to hydrocarbons and to abrasion, anti-shock and anti-slipping
Article HRD057E has been tested using a method analogous to ASTM F2413-24 (EH) and CSA Z195-14: determination of resistance to an electric shock, increase 1 kV/sec, voltage 20,000 V/60 Hz  holding the voltage for 1 minute. Electrical current requirement below 1.0 mA.
The outsole of the footwear, within specific limits (in the absence of moisture, not referring to the upper), was tested using a method analogous to EN ISO 20345:2022 to provide electrical insulation against voltages up to 1000 V  M ohm >1000.
(Test report No. 4325006.01/EA)
DIELECTRIC INSOLE bimaterial extracomfort with activated carbon, breathable, removable, anatomical, absorbent, insulating and antibacterial.
Environmentally Sustainable Eco-Friendly
FO sole resistance to hydrocarbons
E energy absorption on seat region
PS sole resistance to perforation non  metallic (nail Ø3,0mm)
CI cold insulation of sole complex -17°C
HI heat insulation of sole complex
HRO resistance to hot contact of the outsole
WR water resistant shoe
SR sole resistance against slipping
THIS PRODUCT COMPLIES WITH THE REQUIREMENTS OF THE STANDARD ASTM F2413-24:
- Impact resistant footwear (I)
- Compression resistant footwear (C)
- Puncture Resistant Footwear (PR)
- Electric Hazard Resistant Footwear (EH)
- Slip Resistance (SRO)
Size 39-47 Shoe weight Sz 42 gr. 625
Size guide
Size guide
Comparison table of measurements
EUROPAUKUSMILLIMETERSINCHES
35
2,5

3,5

225

8,9

36
3

4

232,5

9,2

37
4

5

240

9,5

38
5

6

247,5

9,7

39
6

7

255

10

40
6,5

7,5

262,5

10,3

41
7

8

270

10,6

42
8

9

277,5

10,9

43
9

10

285

11,2

44
10

11

292,5

11,5

45
10,5

11,5

300

11,8

46
11

12

307,5

12,1

47
12

13

315

12,4

48
13

14

322,5

12,7

49
14

15

330

13
Recommended areas of use
Cold Environments
Electrician
Certifications applied
Heel Energy Absorption
Heel Energy Absorption
Certifications
Heel Energy Absorption
Footwear with energy absorption in the heel to reduce impact while walking. Enhances comfort and protects joints in demanding work environments.
ASTM F2413-24
ASTM F2413-24
Certifications
ASTM F2413-24
ASTM F2413-+E18:E6924 specifies the safety, performance, and protective requirements that safety footwear must meet according to U.S. standards.
Water-Repellent Footwear
Water-Repellent Footwear
Certifications
Water-Repellent Footwear
Water-repellent footwear designed to resist water penetration, keeping feet dry even in humid or rainy environments.
Heat Insulating Outsole
Heat Insulating Outsole
Certifications
Heat Insulating Outsole
Heat-insulating sole designed to protect the foot from high temperatures, ensuring comfort and safety in work environments exposed to hot surfaces.
Insulation up to 20,000V
Insulation up to 20,000V
Certifications
Insulation up to 20,000V
Dielectric soles insulated up to 20,000 V, designed to shield the operator from high-voltage electric discharges in electrical or industrial work environments.
Water Penetration and Absorption (WPA)
Water Penetration and Absorption (WPA)
Certifications
Water Penetration and Absorption (WPA)
The upper material is tested to resist water penetration, keeping feet dry even in wet or rainy environments.
PS Puncture Resistance with Non-Metallic Insert (nail Ø 3.0mm)
PS Puncture Resistance with Non-Metallic Insert (nail Ø 3.0mm)
Certifications
PS Puncture Resistance with Non-Metallic Insert (nail Ø 3.0mm)
Anti-perforation plate inserted in the sole to protect the foot from sharp objects and punctures, ensuring safety in hazardous work environments. PS puncture resistance with non-metallic insert (nail Ø 3.0mm)
Hydrocarbon Resistance
Hydrocarbon Resistance
Certifications
Hydrocarbon Resistance
Footwear resistant to hydrocarbons, designed to maintain the properties of the sole when in contact with oils and fuels. Ideal for industrial environments and workshops.
Slip Resistance (mandatory ceramic-Nals test)
Slip Resistance (mandatory ceramic-Nals test)
Certifications
Slip Resistance (mandatory ceramic-Nals test)
According to EN ISO 20345:2022, slip resistance is a mandatory requirement and is tested on a ceramic surface contaminated with sodium lauryl sulfate (NaLS) solution. This test, stricter than previous versions, simulates real slipping conditions and ensures that all certified safety footwear provides a minimum level of grip. The SRA, SRB, and SRC classifications have been removed in the new regulation, making the NaLS ceramic test the standard.
Heat-Resistant Sole 300°C Contact
Heat-Resistant Sole 300°C Contact
Certifications
Heat-Resistant Sole 300°C Contact
Sole resistant up to 300 °C, ideal for protecting the foot in high-temperature industrial environments or when working with hot materials.
Technical materials
High Visibility
High Visibility
Technical materials
High Visibility
High-visibility footwear with reflective inserts for greater safety in low-light conditions. Ideal for night work or high-risk environments.
Cold Insulating Outsole
Cold Insulating Outsole
Technical materials
Cold Insulating Outsole
Cold-insulating outsole designed to keep feet warm, effectively protecting from low temperatures in cold or outdoor work environments.
Mondo Point 11
Mondo Point 11
Technical materials
Mondo Point 11
Mondo Point is an international standard indicating the type of fit of a particular shoe. In terms of fit, Mondo Point 11 indicates a wide, roomy, and comfortable shoe for the foot.
Metal-Free
Metal-Free
Technical materials
Metal-Free
Metal-free work shoes, free of metal components, lightweight and comfortable, ideal for environments with high security checks. Offers protection and flexibility without interfering with metal detectors.
No metal
No metal
Technical materials
No metal

High-resistance TEXTILE anti-perforation midsole. Protects the foot from penetration by dangerous and sharp objects. At the same time, it ensures maximum flexibility and lightness for the foot.
COMPOSITE toe cap resistant to impacts up to 200 Joules, lightweight and metal-free, ideal for safely protecting the toes without adding weight to the footwear.
Unlike other materials, composite offers several advantages: thermal insulation (does not transmit heat), non-magnetic (not detected by metal detectors), and memory (in case of compression, it returns to its original shape, leaving toes free).

Slip Resistance (optional glycerin test)
Slip Resistance (optional glycerin test)
Technical materials
Slip Resistance (optional glycerin test)
The slip-resistant sole features a special compound and tread pattern designed to maximize grip on wet or slippery surfaces, improving safety on the job.
WindTex Membrane
WindTex Membrane
Technical materials
WindTex Membrane

The Windtex® membrane is a technology designed to block water and wind. Lightweight and elastic, it provides comfort and protection throughout the workday while maintaining a stable microclimate between the skin and fabric. Thanks to its high breathability, it is ideal for breathable safety shoes that need to prevent overheating and excessive sweating even in winter or during long shifts.

Scratch-Resistant Leather
Scratch-Resistant Leather
Technical materials
Scratch-Resistant Leather

Zero Abrasion technology uses leather finished with multiple layers of polyurethane to protect the upper from scratches, cuts, and wear. This solution ensures that the footwear maintains flawless performance and appearance even after months of intense use, providing advanced resistance against abrasive surfaces and mechanical environments—all while preserving foot comfort and breathability.

Request further information
Request further information
Request further information

Are you a company interested in our products or want to become a Giasco distributor?

Fill out the form and you will be contacted by our technical-sales team or discover all the advantages of becoming a Giasco distributor.

Find out more
Always stay one step ahead in the world of safety
Subscribe to our newsletter and get early access to:
  • The latest innovations in safety footwear
  • Case studies and secrets for workplace protection
  • Insights into industry regulations
  • Events, trade fairs and exclusive meetings with experts
Sign up now